Uplander FWD V6-3.5L VIN L (2006)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
Power Steering Pump Replacement
Removal Procedure
1. Important:
It is not necessary to completely remove the drive belt from the engine.
Remove the accessory drive belt from the power steering pump pulley.
2. Remove the fuel injector sight shield.
3. Disconnect the power steering pressure hose from the pump.
4. Disconnect the power steering return hose from the pump.
5. Remove the engine electrical harness from the reservoir retainers.
6. Remove the power steering pump mounting bolts.
7. Remove the power steering pump from the vehicle.
8. Remove the power steering pump pulley from the pump.
9. Remove the reservoir from the pump.
Installation Procedure
1. Install the reservoir to the pump.
2. Install the power steering pump pulley.