Uplander FWD V6-3.5L VIN L (2006)
1. Install the stabilizer link (2) to the suspension strut and stabilizer shaft.
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the stabilizer shaft link upper nut (1).
Tighten the nut to 23 Nm (17 ft. lbs.).
3. Notice:
Refer to Fastener Notice in Service Precautions.
Install the stabilizer shaft link lower nut (3).
Tighten the nut to 23 Nm (17 ft. lbs.).
4. Install the tire and wheel assembly.
5. Lower the vehicle.