Uplander FWD V6-3.5L VIN L (2006)
7. Disconnect the TOC inlet hose from the radiator.
8. Disconnect the TOC hoses from the radiator support retainer.
9. Remove the TOC hoses from the vehicle.
Installation Procedure
Notice:
Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid loss.
1. Install the TOC hoses to the vehicle.
2. Connect the TOC hoses to the radiator support retainer.
3. Connect the TOC inlet hose to the radiator.
4. Connect the TOC inlet hose to the transaxle.