Uplander FWD V6-3.5L VIN L (2006)
5. Install the brace bolts to the transaxle.
Tighten the bolts to 43 Nm (32 ft. lbs.).
6. Install the right engine splash shield.
7. Install the right front tire and wheel.
8. Lower the vehicle.
5. Install the brace bolts to the transaxle.
Tighten the bolts to 43 Nm (32 ft. lbs.).
6. Install the right engine splash shield.
7. Install the right front tire and wheel.
8. Lower the vehicle.