Uplander FWD V6-3.5L VIN L (2006)
Windshield Washer Spray Nozzle: Service and Repair
Washer Nozzle Replacement - Front
WASHER NOZZLE REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Turn the ignition switch to the ACCY position.
2. Set the wiper switch to the Delay position.
3. Turn the ignition switch off when the wipers are in the inner wipe position.
4. Using a small flat-bladed tool, remove the lower washer nozzle from the wiper arm.
5. Using a small flat-bladed tool, remove the upper washer nozzle from the wiper arm.
6. Disconnect the upper washer nozzle from the upper washer nozzle hose.
7. Remove the upper washer nozzle hose from the wiper arm.
8. Disconnect the washer nozzle from the washer hose.
9. Remove the washer nozzle hose from the wiper arm.
INSTALLATION PROCEDURE
1. Position the washer nozzle hose to the wiper arm.
2. Connect the washer nozzle to the washer hose.
3. Install the upper washer nozzle hose to the wiper arm.
4. Connect the upper washer nozzle to the upper washer nozzle hose.