Venture V6-3.4L VIN E (1997)
Parking Brake Pedal: Service and Repair
CAUTION: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application.
General Motors will call out those fasteners that require a replacement after removal. General Motors will also call out the fasteners that require thread
lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on
threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and the joint clamping force, and may damage
the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage
to parts and systems.
NOTE: - Tool Required:
-
J 37043 Parking brake cable release tool, or equivalent release tool.
Parking Brake Lever
REMOVE OR DISCONNECT
1. Left-side instrument panel insulator.
2. Left-side carpet retainers.
3. Electrical connector at parking brake indicator switch.
4. Raise vehicle and suitably support.
