Venture V6-3.4L VIN E (1997)
14. Remove the upper intake manifold studs and bolts.
15. Remove the upper intake manifold.
16. Remove the upper intake manifold gaskets.
Installation
1. Install the upper intake manifold gasket.
2. Install the upper intake manifold.
3. Install the upper intake manifold bolts.
-
Tighten the bolts to 25 Nm (18 ft. lbs.).
-
Install the Coolant hoses to the throttle body. Install the Exhaust Gas Recirculation (EGR) tube assembly to the right exhaust manifold.