Venture V6-3.4L VIN E (1997)
Ignition Cable: Service and Repair
Spark Plug Wire Routing Engine Front View
Spark Plug Wire Routing Engine Rear View
NOTICE: Pull on spark plug boot or heat shield only, twisting a half turn to release seal while removing. Do not pull on the spark plug wire or it may be
damaged.
Remove or Disconnect
1. Turn the ignition "OFF."
Important: Note position of wires and wire looms before removing.
2. Spark plug wires from front spark plugs by twisting the boot 1/2 turn before removing.
3. Spark plug wire retaining clips from engine.
4. Rotate engine. Refer to Engine Mechanical.
5. Spark plug wires from rear spark plugs.
