Venture V6-3.4L VIN E (1997)
2.
Locate the sheet metal seams at the base of the windshield on both sides of the cowl. Refer to the dotted line in the illustration above for the
location. Left side shown. Right side typical.
3.
Apply Medium Body Seam Sealing Compound, P/N 12378500 (in Canada, P/N 10952233), or equivalent, as required, to the sheet metal seams on
both sides of the cowl.
4.
Reinstall the air inlet grille. Refer to the Air Inlet Grille Panel Replacement procedure in the Body Front End Sub-section of the Service Manual.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
Important:
Saturn Retailers Only: Do NOT claim GM P/N 12378500. It will be necessary to sell Medium Body Seam Sealer to the CSO as "material" using net
item code "M". Claims received in the amount of $2.50 for this part will be accepted. Claims exceeding the amount of $2.50 will be returned with the
Return Reason 143 - Material/Reimbursement > Maximum Allowed.