Venture V6-3.4L VIN E (1997)
There may be a void in the sealer between the inner and outer wheel house liner. Refer to the highlight in the illustration above.
Correction
Important:
Wear safety glasses and use compressed air to dry the area.
Clean the surface area with one of the cleaners listed below and then seal the hole with one of the sealers listed below.
Condition 11
Some customers may comment on wet carpet at the rear of the vehicle.
Cause
The weatherstrip may be turned in on the sides causing poor contact to the liftgate surface. Refer to the arrow in illustration above.
Correction
1.
Remove the weatherstrip from the hem flange.
2.
Bend the hem flange outboard to ensure a better seal contact.
Condition 12
Some customers may comment on wet carpet at the rear of the vehicle.
Cause
