Venture AWD V6-3.4L VIN E (2004)
weatherstrip while installing it.
5. Align bottom center cutout in weatherstrip to the liftgate striker.
6. Use a rubber mallet to ensure full engagement of the liftgate weatherstrip to the pinch-weld flange.
7. Pull the tear strip at the liftgate body wedge around the entire length of liftgate opening to remove.
*
Removal of the tear strip should pull the inner lip of the liftgate weatherstrip out over the interior trim. Spooning of the liftgate weatherstrip
may be required to complete the installation of the liftgate weatherstrip.
*
Spooning of the reused liftgate weatherstrip will be required to complete the placement of the liftgate weatherstrip.
8. Install the liftgate sill plate. Refer to Door Sill Plate Replacement - Liftgate (See: Interior Moulding / Trim/Scuff Plate/Service and Repair) in
Interior Trim.
9. Close the liftgate.
