Venture AWD V6-3.4L VIN E (2004)
13.
Adjust the lift stop position. The lift should stop when the post on the left stop makes contact in the rubber bushing, and the right post is 2-4 mm
(0.040-.080 in) from contacting the metal hook.
14.
Inspect the seat for proper installation by operating the seat in and out, and ensuring the vehicle can be shifted out of park.
15.
With the seat in the extended-out position, reinstall the upper seat trim.
16.
Reposition the seat in the vehicle.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer