W 3500 L4-5.2L DSL Turbo (2005)
5. Tighten the injection pipe and the clip using the specified mounting torque.
Injection pipe sleeve nut
Tightening torque: 44 N.m (33 lb ft)
Injection pipe clip
Tightening torque: 6 N.m (4 lb ft)
-
Apply a thin coat of engine oil on the periphery of the sleeve nut on the fuel injector side and assemble.
6. Install the gasket to the EGR valve and tighten the bolts to the specified torque.
Tightening torque: 24 N.m (17 lb ft)
7. Install the gasket to the EGR adapter and tighten the bolts to the specified torque.
Tightening torque: 24 N.m (17 lb ft)