W 3500 L4-5.2L DSL Turbo (2005)
Fuel Filter: Service and Repair
Fuel Filter Cartridge
Removal
Fuel Filter Cartridge
Removal
1. Remove the cartridge using the filter wrench.
Special tool
Filter wrench: J-22700
2. Remove the sedimenter sensor.
Installation
Fuel Filter Cartridge
Installation
1. Assemble the sedimenter sensor in the new cartridge.
2. Clean the cartridge mounting surface in the filter body so that the cartridge can be seated securely.
3. Coat a thin layer of engine oil on the O-ring in the new cartridge.
4. To simplify air bleed, fill light oil on the new cartridge.
5. Tighten the cartridge until the O-ring touches the sealing surface. During this process take adequate care that the light oil that is inside does not
flow out.
6. Use the filter wrench and tighten rotating by 1/3 to 2/3.
Special tool
Filter wrench: J-22700