300 V6-3.5L (2008)
Trunk / Liftgate Latch: Service and Repair
Installation
INSTALLATION
1. Position the latch (3) to the inside of the deck lid (1).
2. Install and tighten the two screws (2) that secure the latch to the inside of the deck lid. Tighten the screws to 8 Nm (71 in. lbs.).
3. Reconnect the connector (2) of the body wire harness take out for the deck lid (1) to the latch connector receptacle (3).
4. Reinstall the cover over the latch on the inside of the deck lid. See: Trunk / Liftgate Interior Trim Panel/Service and Repair/Installation.
5. Reconnect the battery negative cable.
6. Close the deck lid.