300 V6-3.5L (2008)
Rear Fender Liner: Service and Repair
Removal
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheels from the side of the vehicle being serviced See: Maintenance/Wheels and Tires/Service and Repair/Removal and
Replacement/Tires and Wheels - Removal.
3. Remove the rear portion of the body side cladding from the side of the vehicle being serviced .
4. Remove the nuts (1), bolt (2) and the push-pins (4), that secure the lower rear wheelhouse shield (3) to the body.
5. Remove lower rear wheelhouse shield from the vehicle.
6. Remove the push-pins (1) that secure the rear wheelhouse shield (2) to the body.
7. Remove the rear wheelhouse shield from the vehicle.