300 V6-3.5L (2008)
8. Install the side shields (2) and install the screws.
9. Install the lumbar and recliner handles.
Second Row
REMOVAL
1. Place seat belt into position and install the seat belt anchor nut. Tighten nut to 32 Nm (24 ft. lbs.).
2. Place the seat cushion into position and push downward on the forward edge of the seat cushion to lock into position. See: Seat Cushion/Service
and Repair/Seat Cushion / Cover - Removal
60/40 Seat Back - Wagon
60% SEAT BACK SIDE
1. With the 40% seat back removed.
2. Place 60% seat back (5) into position on the studs.
3. Fold the 60% section of the seat down.