300 V6-3.5L (2008)
Camshaft: Removal and Replacement
Camshaft - Removal
REMOVAL
NOTE: Camshafts are removed from the rear of each cylinder head.
1. Remove the cylinder headSee: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Removal.
CAUTION: Care must be taken not to nick or scratch the journals when removing the camshaft.
2. Carefully remove the camshaft (3) from the rear of the cylinder head.
Camshaft - Installation
INSTALLATION
NOTE: Care must be taken not to scrape or nick the camshaft journals when installing the camshaft into position.
1. Lubricate camshaft (3) bearing journals, camshaft lobes and camshaft seal (4) with clean engine oil and install camshaft (3) into cylinder head.
2. Install the cylinder head See: Cylinder Head Assembly/Service and Repair/Removal and Replacement/Cylinder Head - Installation.