300 V6-35L 2008: Maintenance, Alignment, System Info, Service, Repair, Wheel Alignment
15. AWD - Tighten the tie rod jam nut (3) to 75 Nm (55 ft. lbs.) torque using care not to lose adjustment.
16. RWD - Tighten the tie rod jam nut (3) to 75 Nm (55 ft. lbs.) torque using care not to lose adjustment.
17. Make sure the inner tie rod-to-steering gear boot is not twisted, then reinstall the boot clamp at the inner tie rod.
18. Adjust front toe on opposite side of vehicle using the above procedure as necessary.