300 V6-3.5L (2008)
7. Unthread return hose tube nut (1) from steering gear (2).
8. Remove screws (1) fastening routing clamps securing return hose (3) to right side of engine cradle (2).
9. Remove return hose from vehicle.
Return Hose - Gear To Cooler - RWD
GEAR TO COOLER - RWD
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Raise and support vehicle. See: Vehicle Lifting/Service and Repair
4. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal