300 V6-3.5L (2008)
6. Connect the electrical connector to EGR valve and lock.
7. Install upper intake manifold, See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Intake Manifold - Installation.
8. Install the shock tower brace.
9. Install the wiper module, See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Wiper Module - Installation.
10. Relocate the purge solenoid.
11. Install purge solenoid to bracket.
12. Connect negative battery cable.
13. Using a diagnostic scan tool, erase any previously recorded DTC's (Diagnostic Trouble Codes).