300 V6-3.5L (2008)
4. Align the spline on the steering wheel hub to shaft and install the steering wheel (1).
5. Install a NEW retaining bolt (2). Tighten the bolt to 70 Nm (52 ft. lbs.).
6. Install the driver airbag (3) See: Air Bag/Service and Repair/Driver Airbag - Installation.
7. Connect the battery negative cable. If equipped with Electronic Stability Program (ESP), the steering angle sensor must be calibrated See: Starting
and Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
