300 V6-3.5L (2008)
6. Remove the battery positive cable to rear PDC fastener (3).
7. One at a time, free the battery positive cable from the routing clips located in the rear compartment area.
8. Remove the right, front seat, See: Body and Frame/Seats/Service and Repair/Seat - Removal.
9. Remove the right, rear seat cushion. Pull upward at forward edge of each retainer loop of the rear seat cushion to disengage retainer loops from
cups in floor.
10. Remove the right, front and rear door sill trim panels.
11. Remove the right, B - pillar lower trim panel, See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar
Trim.
12. Position carpet aside to gain access to the battery positive cable.
13. One at a time, free the battery positive cable from the routing clips located in the rear seat area.
14. Position the bulkhead insulator aside to gain access to the battery positive cable bulkhead fastener.
15. Remove the battery positive cable to bulkhead fastener.