300 V6-3.5L (2008)
CAUTION: When loosening jam nut and rotating inner tie rod, use care not to twist bellows at inner tie rod. Remove clamp (2) at inner tie rod
and make sure bellows moves freely before rotating inner tie rod.
5. Loosen tie rod jam nut (1) at each outer tie rod (4).
6. Remove outer tie rod (2) end nut (1) at each knuckle (3).
7. Using Remover (2), Special Tool 9360, separate outer tie rod (1) from each knuckle.
8. Remove steering coupling pinch bolt at steering gear. See: Steering Shaft Coupler/Service and Repair/Steering Coupling - Removal
