300 V6-3.5L (2008)
4. Remove outer tie rod end nut (1) at knuckle (3).
5. Using Remover (2), Special Tool 9360, separate outer tie rod end (1) from knuckle.
6. Unthread outer tie rod from inner tie rod. Count number of turns when removing outer tie rod. This will give a good starting point when
reassembling and when setting toe.
Outer Tie Rod - Rear-Wheel-Drive
OUTER TIE ROD - REAR-WHEEL-DRIVE
1. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
2. Remove wheel mounting nuts (3), then front tire and wheel assembly (1).