300 V6-3.5L (2008)
9. Slowly lower jack allowing repair-side of crossmember to drop. Do not lower jack at a fast rate. Lower jack just enough to allow toe link
mounting bolt at crossmember.
10. If equipped, remove wheel speed sensor cable (2) from toe link.
11. While holding toe adjustment cam bolt from rotating, remove nut (3) securing toe link at crossmember (1).
12. Slide cam bolt (2) rearward out of crossmember and link (1).
13. Remove mounting bolt (3) and nut at knuckle.
14. Remove toe link (1).
Right Link
RIGHT LINK