300 V6-3.5L (2008)
![background image](/chrysler/300/v6-3.5l/Page-1892001.png)
Stabilizer Bar: Service and Repair
Rear Stabilizer Bar - Removal
REMOVAL
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
3. On each side of vehicle rear, remove wheel mounting nuts (3), then tire and wheel assembly (1).
4. Remove rear exhaust system (2) (dual-outlet exhaust shown in figure). See: Engine, Cooling and Exhaust/Exhaust System/Muffler/Service and
Repair/Muffler - Removal