300 V6-3.5L VIN G (2005)
8. On each side of crossmember, install bolt and nut (1) fastening spring link (4) to crossmember. Do not tighten at this time.
9. On each side of crossmember rear, guide leading end of rear parking brake through crossmember bracket (1 - left)(2 - right) near equalizer and
press cable housing retainer into bracket allowing retainer fingers to lock cable in place.
10. On each side of crossmember rear, install J-nut for parking brake cable guide.
11. On each side, install screw fastening parking brake cable routing guide (1) to crossmember.