300 V6-3.5L VIN G (2005)
Wheel Bearing: Description and Operation
Front Suspension
FRONT SUSPENSION
HUB / BEARING
DESCRIPTION
The front wheel bearing and wheel hub of this vehicle are a one piece sealed unit or hub and bearing unit type assembly.
On All-Wheel-Drive (AWD) vehicles, the hub and bearing (1) is mounted to the knuckle using four mounting bolts and to the axle half shaft using a
retaining nut. The center of the AWD hub and bearing is splined to match the outer joint of the axle halfshaft.
On Rear-Wheel Drive (RWD) vehicles, the hub and bearing (1) is mounted to the center of the spindle using a retaining nut.
All front hub and bearings have five wheel mounting studs (3) on the hub flange for mounting the wheel to the vehicle. The wheel mounting studs are