300 SRT-8 V8-6.1L (2008)
Oil Filter: Service and Repair
Installation
INSTALLATION
1. Lightly lubricate oil filter gasket (2) with engine oil.
2. Thread filter onto adapter nipple. When gasket makes contact with sealing surface, hand tighten filter one half turn, or 180°,do not over tighten.
3. Add oil, verify crankcase oil level and start engine. Inspect for oil leaks.
4. Install belly pan . See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair
