300 SRT-8 V8-6.1L (2008)
Coolant Line/Hose: Service and Repair
Installation
5.7L/6.1L ENGINE
1. Position heater tubes into water pump housing.
2. Install mounting bolts. Tighten bolts to 10 Nm (88 in. lbs.).
3. Install heater hose onto heater tubes.
4. Install intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal and Replacement/Intake Manifold
- Installation.
5. Connect negative battery cable.
6. Fill cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
7. Start vehicle and check for cooling system leaks.
