300 SRT-8 V8-6.1L (2008)
4. 3.0L Diesel Engine - Install supply hose (3) on pump (1). Install clamp (2) securing hose in place.
5. Install air cleaner housing and inlet tube. See: Filters/Air Cleaner Housing/Service and Repair/Air Cleaner Housing - Installation
6. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
7. Fill and bleed power steering system. See: Steering and Suspension/Steering/Power Steering/Power Steering Bleeding/Service and Repair
