300 SRT-8 V8-6.1L VIN W (2005)
Disconnect the Cluster C1 connector.
Measure the resistance between ground and the (P392) Door Lock Driver Right Doors circuit.
Q: Is the resistance below 1000.0 ohms?
NO: Go To 3
YES: Repair the (P392) Door Lock Driver Right Doors circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1. See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Verification Tests/Body Verification Test
3. CHECK (P393) DOOR LOCK DRIVER LEFT DOORS CIRCUIT FOR A SHORT TO GROUND
Measure the resistance between ground and the (P393) Door Lock Driver Left Doors circuit.
Q: Is the resistance below 1000.0 ohms?
NO: Replace the Cluster. Perform BODY VERIFICATION TEST - VER 1. See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Body Verification Test
YES: Repair the (P393) Door Lock Driver Left Doors circuit for a short to ground. Perform BODY VERIFICATION TEST - VER 1. See:
Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated
Procedures/Verification Tests/Body Verification Test