300 SRT-8 V8-6.1L VIN W (2005)
Rear Door Latch: Service and Repair
LATCH
REMOVAL
1. Remove the trim panel from the inside of the rear door.
2. Remove the watershield from the inside of the rear door. Refer to Rear Door Panel.
3. Remove the door glass channel and bracket from the inside of the rear door. Refer to Window Track.
4. Reach into the back of the door shell to unsnap the plastic clip that secures the end of the interior door latch lock link (1) to the latch lever and
disengage the link from the latch (2).
5. Remove the interior door latch lock link and knob unit from the rear door.
6. Reach into the back of the door shell to unsnap the plastic clip that secures the end of the interior door handle latch release link (3) to the latch
lever and disengage the link from the latch.
7. Reach into the back of the door shell to unsnap the plastic clip that secures the end of the exterior door handle latch release link (4) to the latch
lever and disengage the link from the latch.
8. Remove the three screws (2) that secure the latch (3) to the outer latch face of the rear door (1).