300 SRT-8 V8-6.1L VIN W (2005)
13.
Use the appropriate pin from the Parts Required section and Install a new ash tray.
14.
Install the shifter bezel.
15.
Install the two front shifter bezel screws. Tighten them to 3.5 Nm (12.6 in. lbs.).
16.
Install the front console rubber mat.
17.
Install the chrome shifter ring.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.