300 SRT-8 V8-6.1L VIN W (2005)
Keyless Entry Module: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2.
WARNING: WAIT TWO MINUTES FOR THE AIRBAG SYSTEM RESERVE CAPACITOR TO DISCHARGE BEFORE
BEGINNING ANY AIRBAG SYSTEM OR COMPONENT SERVICE. FAILURE TO DO SO MAY RESULT IN ACCIDENTAL
AIRBAG DEPLOYMENT, PERSONAL INJURY OR DEATH.
3. Remove the instrument cluster bezel.
4. Remove the steering column opening cover.
5. Reach up behind the left side of the center stack and disconnect the ignition switch (6) and SKREEM (5) electrical connectors.
6. From underneath the ignition switch/lock assembly, loosen the lower retaining screw (2).
7. Remove the two mounting nuts (1) from the front of the instrument panel.