300 SRT-8 V8-6.1L VIN W (2005)
2. Connect 47-way wiring connector (5) at antilock brake module ABM (6).
3. Install brake tubes to rear (1 and 3) at hydraulic control unit. Tighten tube nuts to 14 Nm (124 inch lbs.) torque.
4. Install brake tubes (1, 2, 3 and 10) at hydraulic control unit (5). Tighten tube nuts to 14 Nm (124 inch lbs.) torque.
5. Remove brake pedal holding tool.
6. Connect battery negative cable (2) to battery post. It is important that this is performed properly.