300 SRT-8 V8-6.1L VIN W (2005)
2. Install three screws (2) attaching ABM (1) to HCU. Tighten screws to 2 N.m (17 in.lbs.) torque.
3. Position assembly (5) above mounting grommets (8) and press mounting bracket into place.
4. Clip brake tube (3) to routing clip (4) below Fuse And Relay Center.
5. Clip brake tubes (1, 2 and 10) to two routing clips (6) along upper radiator support.
6. Connect 47-way wiring connector (5) at ABM (6).