300 SRT-8 V8-6.1L VIN W (2005)
5. Install lower condenser mounting bolts. Tighten bolts to 10 Nm (88 inch lbs.)
6. Install lower radiator hose (1) and clamp.
7. Lower vehicle.
8. Install the radiator fan.
9. Install upper radiator upper hose. Align hose so it does not interfere with the accessory drive belt or engine. Position hose clamp so it will not
interfere with the hood.
10. Connect negative cable.
11. Fill cooling system with coolant.
12. Operate engine until it reaches normal operating temperature. Check cooling system and automatic transmission for correct fluid levels.