300 SRT-8 V8-6.1L VIN W (2005)
11. Install spring compressor (1,3,), special tool# 9065, and exhaust adapter arm (1) tool # 9065if needed.
NOTE: All valve springs and seals are removed in the same manner.
12. Insert air hose (1) into spark plug hole and charge cylinder with air.
NOTE: Tap the top of the valve spring retainer to loosen the spring retainers locks.
13. Compress valve spring with valve spring compressor (3) tool # 9065and remove valve retainer locks.
14. Release spring compressor (3) and remove valve spring.
NOTE: The valve springs are interchangeable between intake and exhaust.
15. Remove valve seal.
INSTALLATION