300 SRT-8 V8-6.1L VIN W (2005)
Oil Pan: Service and Repair
PAN-OIL
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the intake manifold.
3. Install engine lift fixture (2)special tool # 8984 and adapter (4) # 8984-UPD. Never use air tools when installing fasteners to engine.
4. Raise vehicle.
5. Remove the belly pan (2).
6. Drain engine oil and remove the oil filter.
7. Unbolt and lower the steering rack from the mounts. Do not remove P/S hoses, tie rod ends or disconnect steering column.