300 SRT-8 V8-6.1L VIN W (2005)
side of the air distribution housing (3).
10. If equipped with dual zone heating-A/C, position the blend door actuator mounting bracket (5) onto the passenger side of the air distribution
housing (3).
11. Install the screws (4) that secure the blend door actuator mounting bracket to the air distribution housing. Tighten the screws to 2 N.m (17 in.lbs.).
12. Position the blend door actuator (2) onto the air distribution housing. If necessary, rotate the actuator slightly to align the splines on the actuator
output shaft with those on the blend door cam.
13. Install the screws (1) that secure the blend door actuator to the air distribution housing. Tighten the screws to 2 N.m (17 in.lbs.).
14. Carefully install the heater core (4) into the driver side of the HVAC air distribution housing (3).
15. Install heater core retaining bracket (2) onto the air distribution housing.
16. Install the screw (1) that secures the heater core retaining bracket onto the air distribution housing. Tighten the screw to 2.2 N.m (20 in.lbs.).