300 SRT-8 V8-6.1L VIN W (2005)
![background image](/chrysler/300_srt-8/v8-6.1l_vin_w/Page-2037001.png)
Turn Signal Lamp: Service and Repair
Repeater Lamp - Export
REMOVAL
1. Push lamp (3) to the left and disengage lamp by rotating it out of the metal around its left edge.
2. Remove lamp.
3. Rotate Socket out.
4. Remove Bulb.
INSTALLATION
1. Replace Bulb.
2. Engage right hook of lamp (3) into the sheet metal (2 - note correct orientation of lettering on lens).
3. Rotate lamp in place until left side engages (light audible click).