300 SRT-8 V8-6.1L VIN W (2005)
![background image](/chrysler/300_srt-8/v8-6.1l_vin_w/Page-769001.png)
Catalytic Converter: Service and Repair
REMOVAL
RH CATALYTIC CONVERTER
WARNING: The normal operating temperature of the exhaust system is very high. therefore, never work around or attempt to service any
part of the exhaust system until it is cooled. special care should be taken when working near the catalytic converter. The temperature of the
converter rises to a high level after a short period of engine operation time.
1. Disconnect negative battery cable.
2. Raise vehicle on hoist.
3. Disconnect downstream oxygen sensor (2) connectors.
4. Remove muffler and resonator.
5. 2.7L/3.5L Only - Remove nuts and cross-brace (2).
6. Remove catalytic converter to ball flange nuts (1).
7. Remove catalytic converter (3).
LH CATALYTIC CONVERTER
1. Raise vehicle on hoist.
2. Hoist vehicle.
WARNING: The normal operating temperature of the exhaust system is very high. therefore, never work around or attempt to service
any part of the exhaust system until it is cooled. special care should be taken when working near the catalytic converter. The temperature
of the converter rises to a high level after a short period of engine operation time.