300 SRT-8 V8-6.1L VIN W (2005)
![background image](/chrysler/300_srt-8/v8-6.1l_vin_w/Page-124002.png)
4. Disconnect the wiper motor electrical connector (1).
5. Remove the two retaining bolts (1 and 4) and remove wiper module (3) from vehicle.
INSTALLATION
1. Inspect the grommet (1) that the wiper motor sits in. If cracked, brittle, or damaged, replace the grommet (1).
2. While positioning the wiper module in its mounting location, make sure that the dowel on the bottom of the wiper motor (1) slides into the