300 SRT-8 V8-6.1L VIN W (2005)
Seat Belt: Service and Repair
Rear - Wagon
REMOVAL
1. Remove the lower seat belt anchor (2) bolt (3).
2. Remove the quarter trim panel.
3. Remove the one rear seat belt retractor (4) retaining nut (2).
INSTALLATION
1. Place the one rear seat belt retractor (4) so that the indexing tab is in its slot.
2. Install the retaining nut (2). Torque nut to 34 N.m (25 ft. lbs.).
3. Install the quarter trim panel.