300 SRT-8 V8-6.1L VIN W (2005)
![background image](/chrysler/300_srt-8/v8-6.1l_vin_w/Page-1483007.png)
1. Place the rear center retractor (2) into position and install the one retaining nut (1). Torque nut to 34 N.m (25 ft. lbs.).
2. Install the rear shelf trim panel.
3. Install the one nut (3) to the seat belt lower anchor. Torque nut to 34 N.m (25 ft. lbs.).
4. Install the rear seat cushion.
Rear Center - Wagon
REMOVAL