300 SRT-8 V8-6.1L VIN W (2005)
7. One at a time, remove the battery cable retaining pushpins, fasteners and routing clips until the cable is free from the vehicle.
8. Remove the battery cable from the engine compartment.
INSTALLATION
1. Position the battery negative cable in the engine compartment.
2. Raise vehicle on hoist.
3. Install the fastener securing the battery negative cable to the transmission housing. Torque the bolt to 11 N.m (8 ft. lbs.).
4. One at a time, install the battery cable retaining pushpins, fasteners and routing clips until the cable is installed exactly where it was in the vehicle.
5. Lower vehicle.
6. Install the fastener securing the battery negative cable to the right front strut tower.