300 SRT-8 V8-6.1L VIN W (2005)
Power Steering Fluid Reservoir: Service and Repair
RESERVOIR
REMOVAL
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body.
4. Remove hose clamp, then supply hose (3) at reservoir (2).
5. Remove hose clamp, then return hose (1) at reservoir (2).
6. Remove reservoir (2) from coolant bottle (4) by sliding it out of guide.
INSTALLATION