300 SRT-8 V8-6.1L VIN W (2005)
10. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
11. Lower vehicle.
12. Connect battery negative cable (2) to battery post. It is important that this is performed properly.
13. Fill pump reservoir with fluid and perform pump initial operation procedure.
14. Perform wheel alignment setting toe to specifications.
15. Tighten tie rod jam nuts (1) to 75 Nm (55 ft. lbs.) torque.
RWD